Introduction of Bending Machine Programming Method

Introduction of press brake machine programming method

I. Drawing preparation

In the preparation of sheet metal bending machine processing procedures, you first need to extract the processing data from the CAD drawings provided by the customer, the division of each process and processing order, and check to ensure that the processing data and process flow is correct.

II. Parameter Setting

Sheet metal bending machine processing parameter setting is a key factor in determining the processing efficiency and product quality. In the programming of the machine before the need for parameter configuration, according to the thickness of the plate, the angle, the degree of concavity and convexity, bending length, bending radius and other factors to set the appropriate bending parameters, in order to ensure that the bending effect in line with the requirements.

Third, the preparation of the programme

1. New programme

In the sheet metal bending machine operator interface, select "New Procedure", according to the required processing technology, set the processing mode of each process in turn, equipment parameters, data and other information.

2. Setting processing parameters

According to the product drawings to determine the processing sequence and process flow, set the required processing parameters, such as bending angle, bending direction, bending speed, lift height and other parameters.

3. Draw the dividing line

In the programme, you need to draw the parting line of the sheet metal material according to the position and size of each part in the drawing, using basic line elements such as bending line and arc.

4. Drawing the bending line

According to the position and size of the parting line, use the bending line element to draw the bending line, and set different bending angle, bending radius and bending direction according to different processing requirements to ensure the processing quality meets the requirements.

5. Save the programme

When the programme is completed, it needs to be saved and uploaded to the control system of the sheet metal bending machine to establish a connection with the machine for subsequent processing operations.

IV. Precautions

1. Ensure that the drawings are correct

Sheet metal bending machine programming before the need to verify the completeness and correctness of the CAD drawings to ensure that the processing data and process flow is correct.

2. Pay attention to the processing parameters set

Reasonable setting of processing parameters can ensure the quality and efficiency of processing. If the processing parameters are not set reasonably, it may lead to processing errors in the bending machine, poor processing quality and other issues.

3. Keep the programme clear and concise

Write a clear structure of the programme should be clear, so that the later modification of the programme, maintenance is more convenient. At the same time, the programme should add notes, instructions, etc., to facilitate the operator's understanding and operation.

4. Regular inspection of equipment

The operating condition of the equipment of the sheet metal bending machine directly affects the processing quality of the product. Regular inspection and maintenance of equipment, timely detection and troubleshooting to ensure stable equipment operation.

[Conclusion

Sheet metal bending machine programming is a complex operation process, which requires an accurate grasp of CAD drawings, processing parameters and programming and other aspects. Only under the guidance of the correct operating methods and precautions can ensure the stable improvement of processing quality and productivity.